Forum Replies Created

Viewing 34 posts - 1 through 34 (of 34 total)
  • Author
    Posts
  • mayki
    Participant
    Post count: 35

    [quote=120245]
    RetroPie 3.6 & OpenELEC 6.0.3: Click here
    * 3 skins set up to use: Arctic Zephyr (default)
    Aeon Nox (for nostalgia! ? )
    Xonfluence (for those who can’t sway from the ‘vanilla’ skin)
    PLEASE NOTE you can not switch to Xonfluence skin from the Arctic Zephyr skin – no idea why but it just doesn’t work so switch to Aeon Nox first and then switch to Xonfluence and you’re good to go. A minor annoyance.

    RetroPie 3.6 & OSMC 2016.02-3: Click here
    Only the standard skin is set up for OSMC
    [/quote]

    Download link RetroPie 3.6 & OpenELEC 6.0.3 and RetroPie 3.6 & OSMC 2016.02-3 is the same (only OpenELEC not OSMC)

    mayki
    Participant
    Post count: 35

    mega:///#start

    mayki
    Participant
    Post count: 35

    [quote=106591]…I can not get wifi configured. The dhcpcd GUI indicates wlan0 is not associated and doesn’t display available network SSIDs. I was also unable to get it to connect when I manually added my network information into wpa_supplicant.conf. I am using an EDIMAX ew-7811un adapter. Any help would be appreciated.

    [/quote]

    Have you somehow solve this problem?
    Getting ready to install, but I need to wi-fi worked.

    mayki
    Participant
    Post count: 35
    in reply to: My Intro Video #106232

    I made a new short video for Retropie 3 final …
    [youtube]http://www.youtube.com/watch?v=96S4KrPB8r4[/youtube]

    mayki
    Participant
    Post count: 35

    [quote=106155]Smithers

    Can y upload the lr-blood.shh file in /home/pi/retropie/roms/ports ? I dont have the time to re-install the 7.2 image..

    [/quote]

    mayki
    Participant
    Post count: 35

    Hello Ewzzy,
    how to enable this feature?

    mayki
    Participant
    Post count: 35

    Hello Smithers,
    how to enable this feature?

    RetroPie_OpenELEC_Dual-Boot_v7.1_SS

    mayki
    Participant
    Post count: 35

    [quote=106020]There is a world of difference between v1 and v7.x! Chances are I left some of my own controller configs in v1 by mistake which have now been removed.

    You need to do any controller set up yourself, I can’t apply a catch all controller setup or I would have already.[/quote]
    I do not want to work setting RETROARCH?
    /opt/retropie/configs/all/retroarch-joypads/
    Does not work START + SELECT to exit the emulator. It works only keyboard.
    It works GAMEPAD PS3 for game QUAKE?

    mayki
    Participant
    Post count: 35
    in reply to: theme zoid #106002

    Very nice themes, I took the liberty to produce two background KODI and RETROPIE.

    mayki
    Participant
    Post count: 35

    Hello Smithers,
    something has changed in the game Quake? Version 7.1 build of me wants to operate PS3 gamepad controls. In version RetroPie_OpenELEC_Dual-Boot_v1_SS it worked OK.
    Which games folder PORTS going to control the PS3 gamepad?

    Adventures Of Square
    Aliens vs Predator
    Brutal Freedom
    Cave Story
    Dinothawr
    Doom 1
    Double Dragon Remake
    Duke Nukem 3D
    Golden Axe Remake
    Heretic
    Hexen
    Quake
    Quake III Arena
    Rise Of The Triad
    Super Mario War
    Wolfenstein 3D

    You need any special setup to be able to operate the PS3 gamepad?
    Thank you very much for the great job you’re doing for us.

    mayki
    Participant
    Post count: 35

    Hello Smithers,
    can you please upload it somewhere only yours files 16:9 / 4:3 retroarch.cfg, original retroarch.cfg, videomodes.cfg?

    mayki
    Participant
    Post count: 35

    [quote=105437]This is the incorrect directory (it was used in an earlier version of RetroPie but changed recently). You need to change it to exactly match the below:

    joypad_autoconfig_dir = /opt/retropie/configs/all/retroarch-joypads/[/quote]

    1,This problem persists when using the script on video mod 4: 3 (4_3.sh)

    2,Videomode switch to 4:3 only worked for the first time, then it’s still only 16:9. You can look at the problem?

    mayki
    Participant
    Post count: 35

    Thank you very much for solving the problem with the controls.

    mayki
    Participant
    Post count: 35

    I installed the new version RetroPie_OpenELEC_Dual-Boot_v7_SS, I proceeded according to this video https://www.petrockblock.com/forums/topic/video-guide-for-ps3-wireless-controller-on-retropie-3-final/ but my PS3 wirelles gamepad works only in the menu, does not in any ROM (Megadrive, PSX, Nintendo) is not working. The previous installation Retropie 3.0 RC everything worked OK.
    In /opt/retropie/configs/all/retroarch-joypads/PLAYSTATION(R)3Controller.cfg

    input_device = "PLAYSTATION(R)3 Controller"
    input_driver = "udev"
    input_b_btn = "14"
    input_y_btn = "15"
    input_select_btn = "0"
    input_start_btn = "3"
    input_up_btn = "4"
    input_down_btn = "6"
    input_left_btn = "7"
    input_right_btn = "5"
    input_a_btn = "13"
    input_x_btn = "12"
    input_l_btn = "10"
    input_r_btn = "11"
    input_l2_btn = "8"
    input_r2_btn = "9"
    input_l3_btn = "1"
    input_r3_btn = "2"
    input_l_x_plus_axis = "+0"
    input_l_x_minus_axis = "-0"
    input_l_y_plus_axis = "+1"
    input_l_y_minus_axis = "-1"
    input_r_x_plus_axis = "+2"
    input_r_x_minus_axis = "-2"
    input_r_y_plus_axis = "+3"
    input_r_y_minus_axis = "-3"
    input_enable_hotkey_btn = "0"
    input_exit_emulator_btn = "3"
    input_menu_toggle_btn = "12"
    input_load_state_btn = "10"
    input_save_state_btn = "11"
    input_reset_btn = "14"
    input_state_slot_increase_btn = "5"
    input_state_slot_decrease_btn = "7"

    EDIT: Problem solved
    https://www.petrockblock.com/forums/topic/retropie-openelec-kodi-dual-boot/page/7/

    mayki
    Participant
    Post count: 35

    Smithers Hi, I have a big problem with a recently installed RetroPie_OpenELEC_Dual-Boot_v7_SS, does not want me to work wireless PS3 gamepad. The menu works OK, but no ROM (Megadrive, Nintendo, PSX) is not working. I’ve set up your in this video https://www.petrockblock.com/forums/topic/video-guide-for-ps3-wireless-controller-on-retropie-3-final/.
    In the last installation RetroPie_OpenELEC_Dual-Boot_v1_SS (Retropie 3.0 RC), everything worked OK. Can you help me? In /opt/retropie/configs/all/retroarch-joypads/ I have PLAYSTATION(R)3Controller.cfg

    input_device = "PLAYSTATION(R)3 Controller"
    input_driver = "udev"
    input_b_btn = "14"
    input_y_btn = "15"
    input_select_btn = "0"
    input_start_btn = "3"
    input_up_btn = "4"
    input_down_btn = "6"
    input_left_btn = "7"
    input_right_btn = "5"
    input_a_btn = "13"
    input_x_btn = "12"
    input_l_btn = "10"
    input_r_btn = "11"
    input_l2_btn = "8"
    input_r2_btn = "9"
    input_l3_btn = "1"
    input_r3_btn = "2"
    input_l_x_plus_axis = "+0"
    input_l_x_minus_axis = "-0"
    input_l_y_plus_axis = "+1"
    input_l_y_minus_axis = "-1"
    input_r_x_plus_axis = "+2"
    input_r_x_minus_axis = "-2"
    input_r_y_plus_axis = "+3"
    input_r_y_minus_axis = "-3"
    input_enable_hotkey_btn = "0"
    input_exit_emulator_btn = "3"
    input_menu_toggle_btn = "12"
    input_load_state_btn = "10"
    input_save_state_btn = "11"
    input_reset_btn = "14"
    input_state_slot_increase_btn = "5"
    input_state_slot_decrease_btn = "7"
    mayki
    Participant
    Post count: 35

    PLAYSTATION(R)3Controller.cfg

    input_device = "PLAYSTATION(R)3 Controller"
    input_driver = "udev"
    input_b_btn = "14"
    input_y_btn = "15"
    input_select_btn = "0"
    input_start_btn = "3"
    input_up_btn = "4"
    input_down_btn = "6"
    input_left_btn = "7"
    input_right_btn = "5"
    input_a_btn = "13"
    input_x_btn = "12"
    input_l_btn = "10"
    input_r_btn = "11"
    input_l2_btn = "8"
    input_r2_btn = "9"
    input_l3_btn = "1"
    input_r3_btn = "2"
    input_l_x_plus_axis = "+0"
    input_l_x_minus_axis = "-0"
    input_l_y_plus_axis = "+1"
    input_l_y_minus_axis = "-1"
    input_r_x_plus_axis = "+2"
    input_r_x_minus_axis = "-2"
    input_r_y_plus_axis = "+3"
    input_r_y_minus_axis = "-3"
    input_enable_hotkey_btn = "0"
    input_exit_emulator_btn = "3"
    input_menu_toggle_btn = "12"
    input_load_state_btn = "10"
    input_save_state_btn = "11"
    input_reset_btn = "14"
    input_state_slot_increase_btn = "5"
    input_state_slot_decrease_btn = "7"

    EDIT: Problem solved
    https://www.petrockblock.com/forums/topic/retropie-openelec-kodi-dual-boot/page/7/

    mayki
    Participant
    Post count: 35

    I have the same problem, I installed the new version RetroPie_OpenELEC_Dual-Boot_v7_SS, I proceeded according to this video https://www.petrockblock.com/forums/topic/video-guide-for-ps3-wireless-controller-on-retropie-3-final/ but my PS3 gamepad works only in the menu, does not in any ROM (Megadrive, PSX, Nintendo) is not working. The previous installation Retropie 3.0 RC everything worked OK.

    mayki
    Participant
    Post count: 35

    Hello Smithers, is there any way to update only sdcard partition with Retropie? I have installed version OpenELEC (KODI) Dual Boot V1 and I tuned OpenELEC and I would not like him set up your again.

    mayki
    Participant
    Post count: 35
    in reply to: My Intro Video #104656

    Thank you for the inspiration. Here you can see my video:
    [youtube]http://www.youtube.com/watch?v=t14nAiITt_4[/youtube]

    mayki
    Participant
    Post count: 35

    [quote=103928]Okay so what are people’s thoughts on creating a new image based on retropie 3 final? Is it worth it or can the changes be obtained via updating the setup script?

    Also, do I go with OSMC or OpenELEC? Let me know.

    All the best
    Steve

    [/quote]

    My opinion is that OSMC with Retropie 3 final. OSMC but it is not working with noobs.

    mayki
    Participant
    Post count: 35
    in reply to: ROM question #103764

    [quote=103689]Pokud chcete, můžu poslat rom balíček s 746 pracovními ROMy pro Mame4all.[/quote]
    Yes, that would be great… :-)

    mayki
    Participant
    Post count: 35

    Problem solved :

    open
    
    /opt/retropie/configs/all/retroarch-core-options.cfg
    
    change
    
    pcsx_rearmed_pad1type = “analog”
    pcsx_rearmed_pad2type = “analog”
    
    to
    
    pcsx_rearmed_pad1type = “standard”
    pcsx_rearmed_pad2type = “standard”
    mayki
    Participant
    Post count: 35

    SOLUTION:
    https://www.petrockblock.com/forums/topic/bluetooth-connection-prompt/

    mayki
    Participant
    Post count: 35

    DS3 gamepad does not work with some PSX games. Tested games wit Retropie 3.0 beta 4 everything OK, install RetroPie / OpenELEC (KODI) Dual Boot Disc Image and I have a couple of games where gamepad does not work at all. SELECT + triangle works to Retroarch menu, but does not work in the game. Game reports that no gamepad is not connected.
    Tested games OK – Crash Bandicoot 2, Spyro 1, Tekken 3
    Tested games NOT WORKING GAMEPAD – Tekken 1, Tekken 2, Tomb Raider 1 (These games but they work in Retropie 3.0 Beta 4)
    Some idea? Can you help?

    EDIT:
    Problem solved :

    open
    
    /opt/retropie/configs/all/retroarch-core-options.cfg
    
    change
    
    pcsx_rearmed_pad1type = “analog”
    pcsx_rearmed_pad2type = “analog”
    
    to
    
    pcsx_rearmed_pad1type = “standard”
    pcsx_rearmed_pad2type = “standard”
    mayki
    Participant
    Post count: 35

    Please help. I can not install Hyperion on Retropie. I installed according to these instructions:

    https://github.com/tvdzwan/hyperion/wiki/installation

    Test instalation :

    pi@retropie ~ $ hyperion-remote --priority 50 --color red --duration 5000
    Unable to connect to host

    SPI Enable with Raspi-Config and config.txt

    dtparam=spi=on

    pi@retropie ~ $ cat /etc/modprobe.d/raspi-blacklist.conf
    # blacklist spi and i2c by default (many users don't need them)
    
    #blacklist spi-bcm2708
    blacklist i2c-bcm2708
    pi@retropie ~ $ sudo hyperiond /etc/hyperion.config.json
    hyperiond: error while loading shared libraries: libpython2.7.so.1.0: cannot open shared object file: No such file or directory

    Ports listening:

    pi@retropie ~ $ netstat -tnl
    Active Internet connections (only servers)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State
    tcp        0      0 0.0.0.0:445             0.0.0.0:*               LISTEN
    tcp        0      0 0.0.0.0:33641           0.0.0.0:*               LISTEN
    tcp        0      0 0.0.0.0:139             0.0.0.0:*               LISTEN
    tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN
    tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN
    tcp        0      0 0.0.0.0:43959           0.0.0.0:*               LISTEN

    I do not know if this is a problem in the port or at the library libpython2.7.so.1.0.
    Some idea? Can you help?

    mayki
    Participant
    Post count: 35

    Probably no advantage, I personally felt like Amber …

    mayki
    Participant
    Post count: 35

    HOW TO Adjusting the main menu skin Amber without the use of Advanced Launcher.
    Go to Settings:
    [URL=http://images.megaupload.cz/screenshot002.png][IMG]http://mini.megaupload.cz/200/screenshot002.png[/IMG][/URL]

    [URL=http://images.megaupload.cz/screenshot004.png][IMG]http://mini.megaupload.cz/200/screenshot004.png[/IMG][/URL]

    Just go to settings and then Home menu, pick one of the empty slots and edit the name (no action) to RetroPie:

    [URL=http://images.megaupload.cz/screenshot005.png][IMG]http://mini.megaupload.cz/200/screenshot005.png[/IMG][/URL]

    [URL=http://images.megaupload.cz/screenshot006.png][IMG]http://mini.megaupload.cz/200/screenshot006.png[/IMG][/URL]

    When you have that done, go with SSH into your Pi and edit the file “/storage/.kodi/addons/skin.amber/1080i/Includes.xml”

    Find the line:

    <item id="21" description="Custom1">
          <visible>!IsEmpty(Skin.String(CustomHome.1.Path))</visible>
          <label>$INFO[Skin.String(CustomHome.1.Label)]</label>
          <thumb fallback="special://skin/backgrounds/default/default.jpg">$INFO[Skin.String(CustomHome.1.Background)]</thumb>
          <onclick>$INFO[Skin.String(CustomHome.1.Path)]</onclick>
        </item>

    Edit the line “onclick” :

    <item id="21" description="Custom1">
          <visible>!IsEmpty(Skin.String(CustomHome.1.Path))</visible>
          <label>$INFO[Skin.String(CustomHome.1.Label)]</label>
          <thumb fallback="special://skin/backgrounds/default/default.jpg">$INFO[Skin.String(CustomHome.1.Background)]</thumb>
          <onclick>System.Exec(/storage/ss/games.sh)</onclick>
        </item>

    [URL=http://images.megaupload.cz/screenshot007.png][IMG]http://mini.megaupload.cz/200/screenshot007.png[/IMG][/URL]

    Reboot the system… :-)

    mayki
    Participant
    Post count: 35

    Good work, MEGA is good, or to create a torrent …

    mayki
    Participant
    Post count: 35

    Set permission to folder “games” and now it works great.
    Thank you very much for your time and help. Children would be happy… :-)

    mayki
    Participant
    Post count: 35

    Set as follows:
    192.168.0.101:/volume1/games /home/pi/games nfs _netdev,nfsvers=4,auto 0 0
    Error: mount.nfs: Protocol not supported

    Adjusted for:
    192.168.0.101:/volume1/games /home/pi/games nfs _netdev,nfsvers=3,auto 0 0
    mount OK however:

    pi@retropie ~ $ ls -al ~/games
    ls: cannot open directory /home/pi/games: Permission denied

    After logging in as root to see the game in your games using WinSCP.
    Only half a success … :-)

    mayki
    Participant
    Post count: 35

    That’s what I put in fstab?
    192.168.0.101:/etc/export/volume1/games on /home/pi/games type nfs rw,intr,tcp,nfsvers=3,rsize=16384,wsize=16384
    If I do it:

    pi@retropie ~ $ sudo mount -a
    [mntent]: line 5 in /etc/fstab is bad
    mayki
    Participant
    Post count: 35

    Change:

    username=smb-user
    password=smb-password

    To:

    username=user
    password=password

    Result:

    pi@retropie ~ $ sudo mount -a
    Retrying with upper case share name
    mount error(6): No such device or address
    Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
    mayki
    Participant
    Post count: 35

    After changing addresses:

    mount error(13): Permission denied
    Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)

    NAS Synology :

    DiskStation> cat /etc/exports
    
    /volume1/Video  *(rw,async,no_wdelay,crossmnt,insecure,no_root_squash,sec=sys,anonuid=1025,anongid=100)
    /volume1/Backup *(rw,async,no_wdelay,crossmnt,insecure,no_root_squash,sec=sys,anonuid=1025,anongid=100)
    /volume1/games  *(rw,async,no_wdelay,crossmnt,insecure,no_root_squash,sec=sys,anonuid=1025,anongid=100)

    Thank you for your help.

    mayki
    Participant
    Post count: 35

    Please help with the creation of a shared folder on Synology NAS.
    1) create share folder my NAS Synology “games”
    2) make a folder in your home dir mkdir ~/games OK
    3) create the .smbcredentials file and set username and password OK
    4) Edit the fstab PROBLEM

    proc            /proc           proc    defaults          0       0
    /dev/mmcblk0p1  /boot           vfat    defaults          0       2
    /dev/mmcblk0p2  /               ext4    defaults,noatime  0       1
    # a swapfile is not a swap partition, so no using swapon|off from here on, use  dphys-swapfile swap[on|off]  for that
    //192.168.0.101:/volume1/games /home/pi/games/ cifs credentials=/home/pi/.smbcredentials,iocharset=utf8,sec=ntlm 0 0 

    5) run commands sudo mount -a

    pi@retropie ~ $ sudo mount -a
    mount error: could not resolve address for 192.168.0.101:: Unknown error

    IP adres my NAS is 192.168.0.101.
    Where is the problem? Please help. Excuse my bad English, I’m from Czech Republic …

Viewing 34 posts - 1 through 34 (of 34 total)