Forum Replies Created

Viewing 35 posts - 1 through 35 (of 61 total)
  • Author
    Posts
  • chdez77076
    Participant
    Post count: 66

    i Would also start with Retropie 3.0

    chdez77076
    Participant
    Post count: 66

    I had problems with mine but its fixed!!!
    If it helps out i downloaded the recent firmware for it on the ultimarc page.

    Then i configured each retroarch.cfg for every system.

    i setup a hot key and i changed all the keyboard presses for all keyboard options (fast-forward, volume up, etc etc etc) to “nul” without the “”.
    Then i just adjusted each player control with a push of the buttons!

    A lil tip is to not use the ALT or CTRL or SHIFT buttons.
    for some strange reason retroarch hates them :)

    You can change which keyboard key is setup for which button using the winipac program on the ultimarc page.

    Hope that helps!

    chdez77076
    Participant
    Post count: 66

    The key config for FBA-LB is the retroarch.cfg one in the fba directory.

    chdez77076
    Participant
    Post count: 66

    yeah you can create it and use this as a template to what you need to put in the actual file itself.

    https://github.com/ssilverm/PiMAME/blob/master/.gngeo/gngeorc

    chdez77076
    Participant
    Post count: 66

    Update the retropie setup script then do a binary update.
    Maybe that will solve the problem?
    I have it on mine!

    chdez77076
    Participant
    Post count: 66

    Check out floobs or herbfargus videos on YouTube.
    They do a great job explaining this!
    Cant upload at link since this is a work computer and YouTube is blocked or else i would.

    chdez77076
    Participant
    Post count: 66

    When you choose a game press x or m before the game starts and choose a different plug-in. I think the rice and gles get the control configuration from the .ini file that has the retrolink controllers already pre configured.

    if you choose the -lb one then you would need to edit the retroarch.cfg file.

    chdez77076
    Participant
    Post count: 66

    After that just edit the retroarch.cfg file for each emulator and your good to go!

    chdez77076
    Participant
    Post count: 66

    I had trouble with my ipac at first too..

    Ultimarc has a program to change which keyboard key is assigned to which button.
    http://www.ultimarc.com/winipacv2.html
    You can download the program and the updated firmware here. http://www.ultimarc.com/download.html

    Hopefully that helps!

    chdez77076
    Participant
    Post count: 66

    Its in opt/retropie/configs/neogeo

    chdez77076
    Participant
    Post count: 66
    in reply to: fba romset #92758

    I think you are right Floob. I saw it earlier today as well.

    chdez77076
    Participant
    Post count: 66

    Awesome!Thanks!

    chdez77076
    Participant
    Post count: 66
    chdez77076
    Participant
    Post count: 66

    Floob, how can I rip an image out of my sd card?

    chdez77076
    Participant
    Post count: 66

    Lr-nes
    Lr-snes
    Lr-masters stem
    Lr-gb
    Lr-gbc
    Lr-gba
    mame4all (using the Lr only for mk2 and mk3)
    mupen64plus testing (rice)
    Lr-fba
    gngeopi (just because it’ll play all the metal slug and kof games.)

    chdez77076
    Participant
    Post count: 66

    Hey buzz i cant get gngeopi to work.
    All my neo geo games are currently running on pifba.
    I previously had then on gngeopi but retropie wont pick up that folder so i switched them to the neogeo folder.
    Once i get the emulator selector up and i choose the gngeopi it just kicks me straight out of the emulator straight back into emulationstation.
    I dont even get the neogeo symbol on the bottem right corner.

    chdez77076
    Participant
    Post count: 66
    in reply to: fba romset #92116

    Awesome! ill be sure to check that out too!

    chdez77076
    Participant
    Post count: 66
    in reply to: fba romset #92111

    Ill check in /opt/retropie/emulators/pifba folder and try as soon as i get home.

    Where would i check to find the .dat file for the FBA-Libreto version?

    chdez77076
    Participant
    Post count: 66
    in reply to: fba romset #92110

    Awesome! ill check it out.

    I’m not too familiar with clrmamepro.

    Tried once and failed miserably.

    I read in other posts that its romset FBA 0.2.97.08 or so but there has been so many different versions of FBA thrown around that i just wanted to clarify which set should be used for each version of FBA (Pifba & FBA-Libreto).

    chdez77076
    Participant
    Post count: 66

    That would be amazing!
    Especially in the N64 part of the project!
    Its a great feature!

    chdez77076
    Participant
    Post count: 66

    buy a mausberry circuit board.

    chdez77076
    Participant
    Post count: 66

    The only way to exit is by assigning one button only.
    It doesn’t support hot keys at the moment.
    I have it setup to exit using the “L” Button since its hardly used on games and if it is used it is usually mimicking the “R” Button.

    chdez77076
    Participant
    Post count: 66

    If i need to add a game onto the RiceVideoLinux.ini do i just add the ROM # inside new “{ROM # Here}” then make up a relevant name for it under that for the “name” description?

    Im guessing you can get the Rom # from the black screen before the game loads right?

    Does the name of the game matter in the way i name them as opposed to using Lower or Upper case letters?

    chdez77076
    Participant
    Post count: 66

    I will definitely keep you updated.

    chdez77076
    Participant
    Post count: 66

    I was looking at that earlier.

    Why don’t you make the ScreenUpdateSetting = 7 as default since it fixes lots of games.

    I’m currently testing it out with that as the default then changing them.

    It’ll clear up the .ini file too.

    chdez77076
    Participant
    Post count: 66

    I just saw it merged. Awesome!
    Do i just sudo ./retropie_setup.sh update the script then download the experimental version of it?

    chdez77076
    Participant
    Post count: 66

    @gizmo98

    I saw that you had a pull request for the vanilla Mupen to test.
    What happened with that?

    Reason i ask is because i recently started to test out some games and mess with the rice settings but i dont want to get some progress with the testing and then the core changes.

    Should i just keep testing or should i wait till the core gets updated?

    chdez77076
    Participant
    Post count: 66

    Instead of deleting the lines put “nul”
    That should disable the ones you don’t want to use.

    chdez77076
    Participant
    Post count: 66

    I dont really see the problem.
    mame4all and pifba have loads of great games!
    My only thing was not being able to play MK2 on Mame but whatever.
    I can still play that game on SNES!

    chdez77076
    Participant
    Post count: 66

    Sounds awesome!
    Will start testing and posting!

    chdez77076
    Participant
    Post count: 66

    Since this is in “Ideas For Further Enhancements” section of the forums, what about adding this –gfx switch in the video options (press x or m) that way they can be saved per individual roms?

    chdez77076
    Participant
    Post count: 66

    in the downloads sections of this website there’s a change log and the image.

    chdez77076
    Participant
    Post count: 66

    I’ve got to try this!!

    I just got my pi2 yesterday so I’m definitely going to try this as soon as I get home from work.

    chdez77076
    Participant
    Post count: 66

    Thats Awesome!

    Somebody should definitely set up a “working n64 roms” database with the specific video plugin + individual changes to the config.

    As more people try this emulator those setting could then maybe be setup as a default config for future releases.

    Win!

    Just a shower thought.

    chdez77076
    Participant
    Post count: 66

    in /opt/retropie/emulators/pifba/fba2x.cfg there is a directory to go to to set up your buttons.

    Maybe paste this file here to see what your current setting are?

    Im at work so im trying to think what i can remember seeing.

    Ive never configured a controller on FBA but im definitely going to so it would help to know as well.

Viewing 35 posts - 1 through 35 (of 61 total)