[postman87]

I run cd /home/pi/RetroPie/BIOS
When I press enter it gives me the line “such directory does not exist”
Didn’t use file manager yet. I’m not at home now so I’ll try that later.

[postman87]

[quote=93863]/home/pi/RetroPie/BIOS

Letters are case sensitive.
[/quote]

I know, but when I go there it says that such folder does not exist :(

[postman87]

Anyone? (A) Still can’t find my BIOS folder

[postman87]

OK, So I got the PSX roms to run on RetroPie. Only problem is that it doesnt see a BIOS file, because I didnt download that beforehand.
Anyway, I downloaded a BIOS called SCPH1001.BIN which should be the right BIOS file.
I followed a tutorial ( this one: http://lifehacker.com/get-a-ps1-emulator-up-and-running-on-a-raspberry-pi-2-1689869367) but when I get to the “put BIOS file in BIOS folder” part it seems to be that I dont have a BIOS folder where he should be. Tutorial says its in /Home/pi/Retropie/BIOS/ but when I try to go there or move the BIOS file to that folder it gives me the info that such folder does not exist :S

Did they recently move the BIOS folder in 3.0? I cant seem to find it anywhere.

Thanks for the help in advance!

[postman87]

Yeah I tried just to change it from
Bin.ecm to .Bin but obviously that didn’t work.
Thanks for the quick reply, I’ll try it when I get back home from work ;)

[postman87]

Is there a way to remove everything in a single folder?
Let’s say in the /psx/ folder I got 2 roms with very long names. Would be easier to delete them in one go instead of typing out both names.

[postman87]

Ok nevermind my noobishnes… Forgot to uncomment. works perfectly now!

[postman87]

Hi all,

I’m having this same exact problem with retropie 3.0 beta.
I tried this solution but somewhere in the config.txt there allready is a line that says hdmi_drive=2 . I’m not sure what I’m doing wrong here, so help would be appreciated. My config.txt looks like this. I did not edit anything, it came like this after installing 3.0 beta.

___________________________________________________________________________

# uncomment if you get no picture on HDMI for a default “safe” mode
#hdmi_safe=1

# uncomment this if your display

has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1

#

uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if

there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16

# uncomment to force

a console size. By default it will be display’s size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720

# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1

# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1

#

uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2

# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# uncomment for composite PAL
#sdtv_mode=2

# for more options see

http://elinux.org/RPi_config.txt
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=256

overscan_scale=1

_____________________________________________________________________

thanks in advance!

[Author]

Posts