Forum Replies Created

Viewing 16 posts - 1 through 16 (of 16 total)
  • Author
    Posts
  • in reply to: Rebooting endlessly rainbow screen #89698
    galego
    Participant

    I made a huge research on the internet.

    The problem really was the PSU.

    But in my case I changed the PSU and to no avail, as a less power.

    My PSU was not defective and the specification was correct.

    My problem was the USB / micro USB cable. He was damaged or was weak.

    Ty guys
    I thank everyone who helped me

    in reply to: Rebooting endlessly rainbow screen #87587
    galego
    Participant

    I still do not know if the case is resolved.
    But following the guidance of the members @buzz @Morpheus and after 2 days of research on the internet really believe that the problem is PSU.
    Tomorrow I will try a new PSU and give the final opinion.
    For now look at the case and the resolution of the problem in this site:
    Case: http://www.b8y.info/pri02en.html
    Resolution: http://www.b8y.info/pri02ansen.html

    in reply to: Rebooting endlessly rainbow screen #87499
    galego
    Participant

    oh man! ty for reply!
    I need your help, if u can! >.< (você é BR?) Se for eu mandei uma mensagem privada pra você!

    tomorrow I’ll try to change my PSU.

    But when you say can be a hardware problem, you refer to SD or in RaspB +?

    in reply to: Rebooting endlessly rainbow screen #87478
    galego
    Participant

    Hey buzz

    where i download “loader.bin”?

    cz I dont have this file in my SD card. and my green led flash 4 times.

    I need download this?

    in reply to: Rebooting endlessly rainbow screen #87446
    galego
    Participant

    no, i dont have!

    One more thing:

    When I turn on the Raspberry and try to sync my Xbox wireless controller, the receiver does not light the LED, even when I hold the button. This may show that the error is really the PSU, right?

    ==
    Yeh i did whitout all usb

    in reply to: Rebooting endlessly rainbow screen #87441
    galego
    Participant

    yes I tried with all the images available on this blog.

    ===

    hmm I’ll buy a new PSU this week.
    But you think I should use a more powerful? more like 3A? (i dunno if this is possible)
    Or just another model whit same powerful 5DC 2A?

    in reply to: Rebooting endlessly rainbow screen #87438
    galego
    Participant

    @buzz

    I tried to installed NOOBS and again without success.
    It just caught on rainbow screen.
    I will try with keyboard and mouse usb wired.
    Another Power Suply, I will try during the week. But it is according to the requirements.

    And about the 2.5x image? where i can download?

    in reply to: Rebooting endlessly rainbow screen #87433
    galego
    Participant

    I’m using keyboard and wireless mouse Microsoft 800. Would be the problem?

    ===
    tested with all possible images.

    2.3
    2.5 Beta
    2.5 Buzz Image

    all failed. all the same problem. reboot and rainbown screen.

    I will try to install NOOBS.

    I need some operating sitema as Raspbian, or NOOBS to install Retropie?

    in reply to: Rebooting endlessly rainbow screen #87421
    galego
    Participant

    where I can download? I just found the Beta version here on the blog.

    I tried to picture 2.5 Beta blog. Without success! The same problem.

    If you think that is the power supply, which you indicate me?
    I’m using to specifications:

    Please confirm that my steps are correct:

    1) format SD card in FAT32
    2) install the image with the win32diskimage
    3) remove safely
    4) put in Raspberry
    5) connect the equipment and finally turn on the power

    I’m doing something wrong? NOOBS is necessary? I’m forgetting some stage? some file?

    in reply to: Rebooting endlessly rainbow screen #87384
    galego
    Participant

    I’m using version 2.3 (RetroPieImage_ver2.3.img) on my Raspberry B +

    I am feeding with a source that:

    http://produto.mercadolivre.com.br/MLB-613432004-carregador-cabo-usb-galaxy-s3-s4-original-samsung-branco-_JM

    I could not even give upgrade. I just put the image with the win32diskimage and put in Raspberry. I turned on all the equipment. After that it is as it is in the video.

    I connected the keyboard and wireless mouse, and the Xbox control receiver.

    in reply to: Raspberry-pi 2 compatibility #86517
    galego
    Participant

    Rasp B+ right?

    in reply to: Raspberry-pi 2 compatibility #86512
    galego
    Participant

    and games like Marvel vs. Capcom? Xmen? Marvel vs Street? Knights of the Round? The entire line of Street Fighter? These games are heavy for a B +? They have lag?

    in reply to: Raspberry-pi 2 compatibility #86492
    galego
    Participant

    Hey MAME emulator does not work well in RaspB +?
    Hey Chito, you’re getting set up and update the RetroPie to work in Rasp2?

    in reply to: Raspberry-pi 2 compatibility #86445
    galego
    Participant

    ty a lot “pmurch”

    That was what I needed to know! ^_^

    in reply to: Raspberry-pi 2 compatibility #86400
    galego
    Participant

    I am now in doubt! I do not know if I buy a Rasp2 or RaspB +. I am interested in buying one to make a Retropie project.
    What would be more appropriate, wait compatibility and system upgrade for Rasp2 or use RaspB +?

    in reply to: Raspberry-pi 2 compatibility #86393
    galego
    Participant

    Please someone could enlighten me:
    it is possible to know if the project will work in Retropie Raspberry 2?
    Can I make a Retropie project in my Rasp2 using the same tools used in a RaspB+ ?
    Or they need to be updated? These updates are available?
    Emulators N64 and PS1 has forecast operating in Rasp2?

    ty sorry my english!

Viewing 16 posts - 1 through 16 (of 16 total)