Forum Replies Created
cascacureParticipant12/22/2015 at 19:09Post count: 7
Thank you for the replies guys, I will give your suggestions a shot.
I was able to successfully run all 3 tests to completion, with no problems (mprime, memtest and sd card stability.sh) earlier documented in by retroresolution here.
I will consider a new power strip, a new PSU, and certainly, editing my boot/config.txt overclock settings if the problem persists, I’ll keep you guys posted.
Thanks for your help, very appreciated.cascacureParticipant12/21/2015 at 22:24Post count: 7
Edit: I am running the mprime cpu test currently, will move onto memtester ram test afterwards and then finally the sd storage stability test script.
Anything else I should be doing? Any logs I can check to further narrow possible defects down? Much thanks.cascacureParticipant12/15/2015 at 23:18Post count: 7
Thank you for your video Floob! Giving it a watch now.
The second option sounds appealing, can you please elaborate on it?
I have successfully applied option 1, I would like to go about going into the systems and re-directing to Thorigs decal.
I assume you mean the system configs found in rp-video-manager/system-retroarch/?
I’ve opened up rp-video-manager/system-retroarch/snes/retroarch.overlay.cfg but am not sure what command to enter to point ot Thorig’s decal.
Much thanks for your contributions.
EDIT: Did some digging and I believe I need to edit the .cfg files in “rp-video-manager/1080p_4-3/”. Now I’ve just got to re-direct the overlay0_overlay = to Thorig’s png located in another folder. I’ll try it and update here.
EDIT 2: No luck after editing the SNES .cfg file in 1080p_4-3 to direct overlay0_overlay = to Thorigs .png
Any help is greatly appreciated before I continue to get ahead of myself ;pcascacureParticipant12/15/2015 at 22:38Post count: 7
Hi Floob, thank you for your reply.
Yes I was referring to Thorig’s decal.
Ideally, I would like to use Thorig’s decal to replace ALL systems effected when using Option 1 for 1080p overlays. (Replacing wooden panel decal w/Thorig’s darker one)
How would I go about attempting this aesthetic change?
Thank you for your time.cascacureParticipant12/15/2015 at 22:01Post count: 7
I have just installed Retropie 3.2.1 on a RPi 2, as well as the rp-video-manager detailed in the link provided by Floob.
I ran the rp-video-manager .sh successfully, and installed the required files.
I then selected overlays for 1080p (option 3) and then selected option 1 and exited.
Everything seems to be running great, but is there anyway to used Toriq’s “decal” for all overlays effected, as opposed to the default one?
I prefer Toriq’s darker image on the front-end as opposed to the wood panel decal.
Thanks so much for your time and effort.
Retropie rocks =)