Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • BuToNz
    Participant
    Post count: 22

    Hi all,

    Getting on well with RetroPie + the Pi2. Everything seems to be running fairly well. Looking forward to the N64 emulation to be tweaked.

    One issue I’m having though is with Gpsp. I have got the libretro version and the controls are working correctly but the directional pad seems to be mapped to the left thumbstick on my 360 pad. This would be fine if it wasn’t incredibly sensitive – seems like there is no deadzone at all. I have tried using the F10 menu to remap but can’t map the directional pad on the 360 pad.

    Any advice? GBA games are pretty much unplayable with the thumbstick at the moment.

    Thanks!

    gizmo98
    Participant
    Post count: 452

    RetroPie-Setup has a gpsp-libretrocore now for rpi2.
    Close EmulationStation with “F4” and type:

    cd RetroPie-Setup
    sudo git pull
    sudo ./retropie_setup.sh

    Select ‘experimental packages’ and ‘gba libretrocore gpsp’

    BuToNz
    Participant
    Post count: 22

    Yeah I’m using that already. Still can’t map the directional keys.

    maddox
    Participant
    Post count: 1

    I just tried to install the experimental version and it failed right away:

    
    cc1: error: /usr/local/include/arm-linux-gnueabihf: Not a directory
    cc1: warning: /usr/local/include: not a directory [enabled by default]
    Makefile:323: recipe for target 'main.o' failed
    make: *** [main.o] Error 1
    
    
    three30zero
    Participant
    Post count: 1

    I’m having the same problem as maddox, with /usr/local/includearm-linux-gnueabihf not being a directory. I’ve ran into this problem while trying to install/compile other games (not RetroPie) as well.

    gizmo98
    Participant
    Post count: 452

    I cannot reproduce your error message. What is your memory split?

    BuToNz
    Participant
    Post count: 22

    Also worth noting my RetroArch hotkeys are not working on Gpsp either. Is something amiss?

    gizmo98
    Participant
    Post count: 452

    Did you copy your roms to /retropie/roms/gba-gpsp-libretro?

    BuToNz
    Participant
    Post count: 22

    [quote=88882]Did you copy your roms to /retropie/roms/gba-gpsp-libretro?[/quote]

    Yeah, they are in there.

    fallersaur
    Participant
    Post count: 7

    [quote=88830]I just tried to install the experimental version and it failed right away:
    [/quote]

    Are you using RetroPie 2.6.0? It is currently working for me.

    I recently built my Pi2 fresh from the 2.6.0 image. After learning about the new libretro version of gpsp I grabbed it from the experimental section, threw the bios in /home/pi/RetroPie/BIOS, and it just simply worked from there for me (Using a USB SNES controller from GTRON). The only other thing to note is that I have mine overclocked to 1000 MHz using raspi-config’s “Pi2” option. I left all of my other settings alone.

    esbiete
    Participant
    Post count: 2

    I had the same compiling problem, please check https://www.petrockblock.com/forums/topic/setting-up-sixaxis-failure/#post-90512 in case is useful also for you.

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.