Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 09/27/2014 at 20:21 in reply to: SNES Pi #81328
    emilio3k
    Participant

    i have 2 original snes pads but i bought the usb one to play it on pc without carrying the big ass adapter wvery time to save space. my adapter has 2 snes port so it’s big. Did the 2 port adapter works if you know?

    09/27/2014 at 20:12 in reply to: SNES Pi #81326
    emilio3k
    Participant

    damn d pads.. original controllers are the best.

    09/27/2014 at 20:07 in reply to: NESπ project #81324
    emilio3k
    Participant

    THANK YOU FOR THE QUICK REPLY!!!!

    10CM is 3.9 inches and it’s perfect so thx alot!

    i don’t want to use all four pads together. but i actually have adapters. I have 2 retro-bit (NES) adapters and 1 SNES adapter with 2 ports (it works?) so if it’s simplier i will go for that solution

    Ah, I forgot a question: How to make the Power button (pushed down to on and release to off) with the LED. and it’s ok to shut down the system like that or should i shut down like a normal pc?

    09/27/2014 at 20:02 in reply to: SNES Pi #81320
    emilio3k
    Participant

    Very cool setup. Is your repro controller (the right one) good? I bought recently a retro-usb snes controller from ebay and the d-pad was messy, very sensible touching the up button by pressing the left or right direction. I replaced the piece with the original snes part but didn’t help much.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)