dpicc68Participant01/04/2015 at 12:30Post count: 53
This is my first attempt at a bar top Weecade clone… With some tweaks..
I’ll upload some of the build..dpicc68Participant01/04/2015 at 12:41Post count: 53
THT USB ENCODER 2 player…(having a couple of issues with FBA at the moment)dpicc68Participant01/04/2015 at 12:44Post count: 53
Found my soldering iron in the garage… Haven’t used it in 25 years….dpicc68Participant01/04/2015 at 12:49Post count: 53
Decided to go with…..
Cheap $10 speakers to give a bit of a crackle….
A couple of little mono amps…
Power board…. I wanted to install an power supply but didn’t trust myself..might get an electrician to look into it for me..dpicc68Participant01/04/2015 at 12:52Post count: 53
19″ monitor….. Terrible viewing angle when sitting down… You get what you pay for…dpicc68Participant01/04/2015 at 12:55Post count: 53
Plexiglass and marquee
Plexi glass is a bit off… Has lines running through it when lit up…
Who needs shaders……
Might need to replace it some time…
Looking around for a decent retro Marquee… Does anybody know a good site?dpicc68Participant01/04/2015 at 12:59Post count: 53
Just in time for Christmas……
Of coarse I built this for my kids…. ;)FloobMember01/04/2015 at 14:45Post count: 1629
That looks really impressive!
I wish these were available to purchase pre-made.dpicc68Participant01/06/2015 at 22:49Post count: 53
Here in oz… They have flat pack kits… But it gets pricey… I.e $200AU for MDF laser cut kit vs $30AU raw materials.
Sent from my iPhone using TapatalkAnonymousInactive01/11/2015 at 22:26Post count: 55
Hi guys !
This is very nice project !
I would do the same but i don’t know how can i do with controllers :/
what i must buy for play with 2 joysticks + 12 bouttons on my Rpi ?
I have really no idea how i can plus joystick and bouttons on my Rpi :/
Sorry for my english i’m student ^^
Thanks :Ddpicc68Participant01/12/2015 at 12:48Post count: 53
Changed Marquee and velcro to fix pi and usb hubdpicc68Participant01/12/2015 at 12:57Post count: 53
The ATX RASPI and case finally arrived over the weekend….
The case is clear acrylic that comes with a fan… And heat sinks…
ATX RASPI power supply
This has been brilliant….
I affixed it to the top of the case.. (Couldn’t fit it inside)
You need to do a little soldering… But the result is your able to press a button to start and shutdown the pi….This is great when your in Terminal…AnonymousInactive01/12/2015 at 14:05Post count: 55
Can you explain how do you plug the joysticks ans boutons on your Rpi :)
Beaceause i have really nous idéal how i van play with joystick ans bouttuns can i used 2 USB controller ? :)
Thanks :Ddpicc68Participant01/13/2015 at 08:30Post count: 53
Google / youtube
Search for DYI arcade..
Arcade joysticks.. Etc
This will give you an idea of how to install.
Your local arcade supplier / eBay will have a 2 player set with a usb encoder.
Search this forum to see what’s issues people have had with usb encoders to narrow down your decision.
Good luck.AnonymousInactive01/13/2015 at 11:43Post count: 55
And you what is your controller ?
Thanks for the answer i will search :)evg33nParticipant04/18/2015 at 10:33Post count: 1
Hello, very nice cabinet! You can show cabinet plans, with dimensions. Thanks in advance.
- The forum ‘Peoples Projects’ is closed to new topics and replies.