Homepage › Forums › RetroPie Project › GPIO Adapter, ControlBlock etc. › gpio adapter SNES controller

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 09/05/2015 at 11:34 #105449
    litzozoid
    Participant

    Hi

    My setup rp1 with gpio adapter and snes controller(retropie 3.0). all works fine. Now i want more power and so i bought a rp2. install retropie 3.0 and plug in my gpio adapter. install the snesdev driver. he said “2 controllers was found” but nothing works.

    help!

    mfg litzoZoid

    10/24/2015 at 22:22 #108316
    Anonymous
    Inactive

    Try all buttons on both controllers to see if any register. I had an issue a while ago where only 1 button would register. The problem was related to either my latch or clock wire, I don’t remember which.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘GPIO Adapter, ControlBlock etc.’ is closed to new topics and replies.