Homepage › Forums › RetroPie Project › Everything else related to the RetroPie Project › Controller configuration problem

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • 07/23/2014 at 13:33 #18615
    Newmi
    Guest

    Hi all,

    I have a problem with the configuration of the snes gamepads.

    I do the following steps to set up the PI:

    – download retropie V2.3
    – create SD card with teh image (Win32imager..?)
    – start the Pi
    – do the configuration with my gemapad
    – go to the terminal
    – expand the file system
    – type the comand: cd RetroPie/emulators/RetroArch/tools
    => now a message is displayed that the directory is not existing…

    have you got an idea, how I can solve this problem??

    Thanks a lot

    07/23/2014 at 15:04 #18637
    trimmtrabb
    Participant

    Hi, there’s a good guide here: https://www.petrockblock.com/forums/topic/updated-for-2-2-step-by-step-guide/

    07/23/2014 at 15:11 #18639
    Newmi
    Guest

    Hi,

    thank you for the answer, I will try this ..

    But is it possible to do the configuration without a network connection?

    The ROMś will be transfaired by an USB stick.

    07/23/2014 at 15:16 #18643
    trimmtrabb
    Participant

    Yes, once in Emulation Station press F4 to exit to the terminal

    07/23/2014 at 15:22 #18646
    Newmi
    Guest

    Ok, to get in the terminal is clear..

    so I do the steps:

    1 to 4 … everything fine
    then in step 8 after the third command, I get a message: could not open joystick #1

    07/23/2014 at 15:30 #18648
    trimmtrabb
    Participant

    try j- 0 instead

    07/23/2014 at 18:47 #18715
    Newmi
    Guest

    Thanks a lot… itś working fine

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Everything else related to the RetroPie Project’ is closed to new topics and replies.