[jakehoms]

I just meant that, since my button config is more than what I just configured, I’d need to go edit the config for all the buttons.

Thanks again for your help. I will now mark this as resolved!

[jakehoms]

Ha! That was it. I apologize for such a dumb question, I thought I hit that already but must have not.

So, where is this input file written, so I can adjust going forward? As I mentioned earlier, my only intention is to set this up for MAME games, so I will need to adjust the file(s) for all the buttons I have for that.

Thank you again!

[jakehoms]

Hi buzz, sorry for the delay and thank you for replying! I have made some progress, but I will answer your questions first.

Yes, Retropie v3.0 and you are correct, it’s a powered hub, so not using the power via the RPi.

I went through my cable drawer and found an another power supply, actually a sanctioned RPi one, and used it, plus another, very basic, USB powered keyboard. Together, this seems to allow me to get through the ‘configuring keyboard’ section! However…… I’m now stuck at an even more basic issue… I can get through each configuring section but whether I assign it a button or not, I can not his the OK button. Hitting Enter, Return, Space bar, etc. Nothing allows me to save the setup. I’ve gone through nearly all keys on the keyboard, and nothing allows it to hit ‘OK’. I can even arrow-up to move around, so I know it’s not frozen, but nothing accepts the ‘OK’ button. Crazy! I’ll do some more tests but that’s where I’m stuck at now. If you or anyone else has any input, please let me know. I can add the dmesg output too if that’ll help.

Thanks!
Jake

[Author]

Posts