Xbox controller works in Emulationstaion, but not fba, mame, snes.

[g0nz0uk]

Hello,

I have a Pi 2 using Retropie 3.0 beta 2.

I have an Xbox 360 wireless controller which I have configured using a great video from Floob. (I think this site should have a section for all videos, even if just links)

And this link

The controller works well in Emulationstation, but doesn’t work in FBA, Mame or snes.

Is there an extra step for FBS etc?

Thanks

[g0nz0uk]

sudo nano XboxGamepad\(userspacedriver\).cfg

Shows this

input_device = “Xbox Gamepad (userspace driver)”
input_driver = “udev”
input_b_btn = “1”
input_y_btn = “3”
input_select_btn = “8”
input_start_btn = “9”
input_up_btn = “h0up”
input_down_btn = “h0down”
input_left_btn = “h0left”
input_right_btn = “h0right”
input_a_btn = “0”
input_x_btn = “2”
input_l_btn = “4”
input_r_btn = “5”
input_l2_btn = “6”
input_r2_btn = “7”
input_l3_btn = “11”
input_r3_btn = “12”
input_l_x_plus_axis = “+0”
input_l_x_minus_axis = “-0”
input_l_y_plus_axis = “+1”
input_l_y_minus_axis = “-1”
input_r_x_plus_axis = “+2”
input_r_x_minus_axis = “-2”
input_r_y_plus_axis = “+3”
input_r_y_minus_axis = “-3”
input_enable_hotkey_btn = “8”
input_exit_emulator_btn = “9”
input_menu_toggle_btn = “2”
input_load_state_btn = “4”
input_save_state_btn = “5”
input_reset_btn = “1”
input_state_slot_increase_btn = “h0right”
input_state_slot_decrease_btn = “h0left”
input_enable_hotkey_btn = “8”
input_exit_emulator_btn = “9”

In fba2x.cfg it matches….??

[Joystick]
# Get codes from “jstest /dev/input/js0”
# from package “joystick”
A_1=0
B_1=1
X_1=2
Y_1=3
L_1=4
R_1=6
START_1=9
SELECT_1=8
#Joystick axis
JA_LR=0
JA_UD=1

Confused now

[Author]

Posts