Homepage › Forums › RetroPie Project › Splash screens › Video Splash Screen
Tagged: splash screen, splashscreen, video
- This topic has 2 replies, 2 voices, and was last updated 10 years, 9 months ago by moorens.
-
AuthorPosts
-
01/08/2014 at 03:36 #3985moorensParticipant
https://vimeo.com/83644752 Splash Screen Video
https://vimeo.com/83644752 Full System Video
http://nicholasmoore.net/2013/09/29/retroconsole-with-custom-music-rev3-1/edit /boot/cmdline.txt file:
sudo nano /boot/cmdline.txtAdd quiet
dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait quietPress ctrl-x, type y to confirm save, then press enter and return to the terminal.
Copy your video to your Raspberry Pi
create a script that will run omxplayer on bootup.
sudo nano /etc/init.d/asplashscreen
#! /bin/sh
### BEGIN INIT INFO
# Provides: asplashscreen
# Required-Start:
# Required-Stop:
# Should-Start:
# Default-Start: S
# Default-Stop:
# Short-Description: Show custom splashscreen
# Description: Show custom splashscreen
### END INIT INFOdo_start () {
omxplayer /home/pi/video.mov &
exit 0
}case “$1″ in
start|””)
do_start
;;
restart|reload|force-reload)
echo “Error: argument ‘$1’ not supported” >&2
exit 3
;;
stop)
# No-op
;;
status)
exit 0
;;
*)
echo “Usage: asplashscreen [start|stop]” >&2
exit 3
;;
esac:
Press ctrl-x, and save
make file executable
sudo chmod a+x /etc/init.d/asplashscreenactivate
sudo insserv /etc/init.d/asplashscreenReboot and wait
01/09/2014 at 19:04 #4050AnonymousInactiveI tried this 3 times now and it works, but there’s always one major problem:
The whole system becomes excessively slow and then unresponsive to anything, no matter what you type, it doesn’t execute giving an error. After rebooting, nothing loads, just error messages.
Another “problem” is the text before and after the video, the “quiet” command doesn’t seem to do anything.
Is this normal, am I the only one getting this?
Thanks for the post though, it made things a lot clearer.
The asplashscreen file has this in it:
do_start () { line=$(head -n 1 /etc/splashscreen.list) isMovie=$(echo $line | grep -o "*.mpg") if [ -z "$isMovie" ]; then /usr/bin/fbi -T 1 -noverbose -a -l /etc/splashscreen.list & else mplayer $line & fi exit 0
I’m trying to understand it still, but I see “isMovie” in there and .mpg, a video format. All things considered, I think I’ll convert my MP4 into an MPG format and replace the splash screen with it, see where that goes.
Thanks for the contribution, it looked great when I booted it! I hope this works. :)
01/09/2014 at 22:46 #4052moorensParticipantLet me know how it goes. If you still have the issue let me know.
I have no lag or any issues.I will try to pull my exact config and make sure I did not change anything.
-
AuthorPosts
- The forum ‘Splash screens’ is closed to new topics and replies.