Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • edward
    Post count: 2


    I am nearly to give up. Please please, help me somehow..
    I got two PS3 Controller (CECHZC2E A1) and can´t get them to work.
    There are 3 bluetooth dongles. All seem to work (running) but I can´t find the controller.They are fully charged and just blinking when hit the middle button.

    What can I do? Latest RetroPi via Berryboot and apt-get update / upgrade is done.
    hcitool scan does not find the controller

    Please help me somehow..

    Post count: 2

    no one? :(

    Post count: 452

    Please update RetroPie-Setup and try gasia-only install option.

    Post count: 3

    I had the same problem on retropie 3.4, with my bluetooth adapter (ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)), which I solved by doing the following:
    – modify the file /etc/default/sixad: replace LEGACY=0 by LEGACY=2
    – reboot (I even had to unplug the power supply)
    – connect my ps3 controller via usb until emulationstation has started
    – disconnect usb cable and press PS button, it’s connected!

    And repeated the two last steps for the second controller.

    Hope that helped.

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Controller Configuration in RetroPie’ is closed to new topics and replies.