Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • matthew
    Participant
    03/23/2015 at 23:33
    Post count: 18
    #92421

    Ok so i have been messing with this for like 3 days on and off. the ps3 controller will only connect over usb. Every guide i can find says it should work but it does not and i don’t receive any errors.

    I have tried this on a RPI1 and RPI2 with the retro pi image supplied here. i even tried a plain wheezy build, updated it and installed the retro-pi script and then updated that and then installed from binary’s and the setup ps3 controller via setup. im not getting any errors. im out of things to try.

    zx-9r
    Participant
    03/25/2015 at 14:52
    Post count: 2
    #92547

    I’ve had the same problem and finally found the solution: set the flag LEGACY = 1 in /etc/default/sixad

    after that, reboot and type sixad –stop, and after that, sixad –start

    this is when you connect your sixaxis by bluetooth

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Everything else related to the RetroPie Project’ is closed to new topics and replies.