- blockabootsParticipant08/20/2015 at 21:41Post count: 94
Ok, i have had RP setup and running on my TV just fine for a while now, today i gave it to my brother to play around with but for some reason there is no audio at all, its using the exact same HDMI and power cable that i have used on my Sony TV, his TV is an LG TV but im not sure why that would make a difference. Surely it being a HDMI cable it should ‘just work’ on any setup??
Any ideas what the issue may be?virusbcnParticipant08/21/2015 at 10:53Post count: 4
Add this in your /boot/config.txt
Its force sound to HDMI TVal3xtecParticipant08/23/2015 at 23:18Post count: 6
Hi – I don’t know if I should start a new thread or not but, I have the same issue. I added hdmi_force_hotplug=1 hdmi_force_edid_audio=1 and hdmi_drive=2 to the bottom of my /boot/config.txt and I have no audio via HDMI. I am connecting it to my sound bar.
I have just upgraded to retroPie 3.0 and I use the Pie 1.2+ B
Any help would be appreciated! :Dxede2014Participant10/04/2015 at 05:43Post count: 1
I spent the past three days on this and finally got it working…
Quit emulation station
type in sudo nano /boot/config.txt
When that page loads, arrow all the way down to the bottom and type in the following:
Give this a try, hope it works!
- The forum ‘New to RetroPie? Start Here!’ is closed to new topics and replies.