Reply To: Libretro MESS in new Retropie 3.6 ?

[zerojay]

Hi. I’m the one that created the script that adds lr-mess to Retropie. I don’t blame you for not knowing how to get it running – most of the libretro developers don’t know either or give conflicting accounts of how to get it running.

*WARNING: This looks long and intimidating. It’s actually quite easy, but I just have to explain to you how things work so that’s why it’s long. Most everything important is done by the installation script.

Follow these instructions exactly to the letter. If you are going to ask a question such as “what if I do this other thing?” the answer is instantly “no”. Not because I’m an asshole or anything like that, but because the core is extremely rigid with how it works. Attempting to do anything different than what I’m presenting you here is going to end in tears. Do not attempt to follow any other person’s tutorial or YouTube video as it may stop you from being able to get things working properly. Undo any changes you have previously made to try to get it running first.

A few explanations first.

* lr-mess is based on latest GIT revision of MAME whenever you attempt to compile it.

* Using lr-mess in the way I am telling you here will only work with MAME Software List ROMs matching the version of MAME you are compiling. Any other set of ROMs will not work. A good guideline for avoiding bad ROMs: If you are downloading them through HTTP from a public ROM site, they are not likely to work. The ROMs cannot be unzipped or renamed.

* At this point, the lr-mess script will automatically set up lr-mess for you only for systems that are known to run well on a Pi 2 with an overclock. If the system is not listed in the lr-mess script, it either has not been tested or has been tested and ran at a bad speed.[

* Systems that have been tested and run well with lr-mess so far:
Colecovision (100% speed, driver: coleco)
CreatiVision (80-100% speed, driver: crvision, not added to the script yet)
Emerson Arcadia 2001 (100% speed, driver: arcadia)
Nintendo Entertainment System (100% speed, driver: nes)
Nintendo Gameboy (100% speed, driver: gameboy)
Sega Dreamcast VMU (100% speed, driver: svmu)

* Systems that have been tested and don’t run as well with lr-mess so far:
Amstrad GX4000 (65% speed, some games still feel very playable, driver: gx4000)
Atari 2600 (70-85% speed, driver: a2600)
Atari 5200 (50-60% speed, driver: a5200)
BBC Micro B (25% speed, driver: bbcb)
Intellivision (Fails to find/load saa5050 ROM, driver: intv)
Nintendo Gameboy Advance (50% speed, driver: gba
Sega Game Gear (80% speed, driver: gamegear)
Sega Genesis (46% speed, driver: megadriv)
Sharp X68000 (14% speed, driver: x68000)
SNK Neo Geo AES (60-65% speed, driver: aes)

All systems other than those listed above have not been tested.

*** Instructions ***

Run the lr-mess script from the experimental menu. Compile should take about 3 hours on a Pi 2.

Check your BIOS folder after compilation and see if a folder named “mame” exists. Within it should be a folder named “hash” that includes a bunch of xml files. These are the software lists that lr-mess requires. If they exist, we likely compiled properly.

Go to your roms directory, wherever you have it (default: /home/pi/RetroPie/roms/) and create a directory named after the driver you wish to use. Place the BIOS file for that driver in the root of your roms directory.

For example, if you wanted to run the Donkey Kong Colecovision rom (dkong.zip) through lr-mess, you would place your files like this:

Main rom directory (/home/pi/RetroPie/roms)
|
+-Coleco Driver BIOS zip: coleco.zip (/home/pi/RetroPie/roms/coleco.zip)
|
+-coleco (/home/pi/RetroPie/roms/coleco)
|
+- dkong.zip (/home/pi/RetroPie/roms/coleco/dkong.zip)

If the driver you wish to use does not require a ROM, you do not need to put one into your roms directory.

Check /opt/retropie/configs/all/retroarch-core-options.cfg and make sure that MAME CLI launching, MAME software lists and MAME auto media type are turned on. The compilation script should set these by default at the bottom of the file, but just make sure.

You may need to add .zip and .ZIP to your extensions in /etc/emulationstation/es_systems.cfg and restart emulationstation for it to pick up your ROMs.

If all goes well, you should get the game running when you select it from emulationstation. If it quits back to emulationstation immediately, you likely have bad ROMs or something else unexpected happened.

Let me know how you get on and what performance you see with systems you try and I’ll eventually add this to the wiki proper.