Homepage › Forums › RetroPie Project › Controller Configuration in RetroPie › GnGeo Xbox 360 Wireless Controller

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • 07/08/2015 at 14:11 #101619
    ekstreme
    Participant

    Hi all,

    I’ve read quite a few posts on GnGeo config and watched floob’s video but no matter what I do, my Xbox 360 controller just will not work.

    I’m using an ‘eBay special’ wireless receiver, which works perfectly fine up until now. The only thing that I can see that seems to be odd about it, is that when I look in /dev/input I see js4 and js5. Either way, it should be fine.

    So my gngeorc conf file, for example the coin button, should be COIN=J4B8 which according to jtest is my select button. But this just will not work. I know the config file is being read as I’ve enabled showfps and some effect successfully.

    Can anyone shed any light on this? Thanks

    07/09/2015 at 23:09 #101745
    Anonymous
    Inactive

    I’ll be following this thread since I’ve got the same dilemma.

    /A

    07/09/2015 at 23:35 #101746
    Floob
    Member

    Try J0B8 for the hell of it.

    Post up your gngeorc if not.

    07/10/2015 at 10:29 #101775
    ekstreme
    Participant

    Well J0 Did the trick!

    I was certain I tried that already. But Oh well :)

    07/10/2015 at 11:37 #101779
    ekstreme
    Participant

    Well…. It sorted did the trick. I can get the analogue axis working, but not the D-Pad which is axis 4 & 5 according to jstest. Analogue Axis 0-3 will all work as left\right & up\down just not 4-5

    07/10/2015 at 17:56 #101804
    Floob
    Member

    Could you post up your gngeorc and jstest results?

    07/11/2015 at 01:55 #101828
    ekstreme
    Participant

    Here is my config using the left thumbstick
    p1control A=J0B0,B=J0B1,C=J0B2,D=J0B3,START=J0B9,COIN=J0B8,UP=J0a1,DOWN=J0a1,LEFT=J0A0,RIGHT=J0A0,MENU=J0B10
    #p2control A=K108,B=K59,C=K111,D=K112,START=K50,COIN=K52,UP=K264,DOWN=K261,LEFT=K260,RIGHT=K262,MENU=K27
    conuntry usa
    system arcade

    jstest: jstest –event /dev/input/js4

    Event: type 2, time 29210, number 5, value -32767
    Event: type 2, time 29320, number 5, value 0
    Event: type 2, time 33080, number 5, value 32767
    Event: type 2, time 33200, number 5, value 0
    Event: type 2, time 33910, number 4, value -32767
    Event: type 2, time 34000, number 4, value 0
    Event: type 2, time 34690, number 4, value 32767
    Event: type 2, time 34790, number 4, value 0

    07/11/2015 at 02:20 #101829
    Floob
    Member

    So when you try J0a1, J0a2, J0a3 its all fine, but J0a4 doesnt do anything?

    07/11/2015 at 07:45 #101844
    ekstreme
    Participant

    Correct, but I have a0, a1 (left thumb) a2, a3 (right thumb) a4, a5 should be the dpad or hat. I Did try setting the hat as per this config: https://github.com/ssilverm/PiMAME/blob/master/.gngeo/gngeorc

    Still no dice.

    I think I might just get rid or GnGeo and use lib-fba

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • The forum ‘Controller Configuration in RetroPie’ is closed to new topics and replies.