[Solved]Snakebyte idroid:con compatible ?

[Anonymous]

Hello
sorry for my English, i am french , i speak a little bit English.

Hardware :
raspberry pi 2 model B
RetroPie Project SD-Card Image V2.5.0, BETA
same problem with Raspbian

I tried to connect my gamepad : snakebyte idroid:con . It’s a gamepad for android device. andoid = a little bit linux ?

I have a nano Bluetooth 4.0 dongle (Trust) –
I installed the firmware manually which was missing now it’s ok

hci0 direct firmware load for bmcr/bcm20702A0-0a5c-21e8.hcd failed with error -2
patch brcm/BCM20702A0-0a5c-21e8.hcd not found

i had :

sudo apk-get update
sudo apk-get upgrade
sudo apk-get install Bluetooth bluez-utils blueman
sudo apk-get install bluez-hcidump

my dongle detects gamepad adress Mac

hcitool scan 
20:73:AB:01:98:76 idroid:con

When i tape :
bluez-simple-agent hci0 20:73:AB:01:98:76

i have a error message :

Creating device failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

why ? my gamepad is not compatible ?

I tested this line :

sudo hciconfig hci0 sspmode 0

it asks for a PIN code that I do not know.
I tried : 0000 or 1234 or 12345 or 54321 , but nothing

can you help me ?

Thanks a lot
Acris

[Anonymous]

Hello,
someone has an idea ?
is it not compatible ?

[Anonymous]

I managed to connect the controller with this command

sudo Hidd --connect MAC:ADRESS

I have some problems:

I have to restart this command on every reboot
When I leave the use of an emulator, gamepad not working

why ? can you help me ?

[Author]

Posts