Reply To: RetroPie not recognizing Xarcade Dual Tank Stick

[Shibo]

This is without Xarcade2jstick installed. This is on raspberry pi model b. Xarcade DualJoyStick

Additionally, when I first setup RetroPie I registered a usb keyboard and both joysticks with their keyboard commands so they could navigate the menus, so I am not sure if that will cause extra input events below.

/dev/input/event0
bustype : BUS_USB
vendor : 0xaa55
product : 0x101
version : 272
name : “XGaming X-Arcade”
phys : “usb-bcm2708_usb-1.2/input0”
uniq : “”
bits ev : EV_SYN EV_KEY EV_MSC EV_LED EV_REP

/dev/input/event1
bustype : BUS_USB
vendor : 0xb38
product : 0x10
version : 272
name : “HID 0b38:0010”
phys : “usb-bcm2708_usb-1.3/input0”
uniq : “”
bits ev : EV_SYN EV_KEY EV_MSC EV_LED EV_REP

/dev/input/event2
bustype : BUS_USB
vendor : 0xb38
product : 0x10
version : 272
name : “HID 0b38:0010”
phys : “usb-bcm2708_usb-1.3/input1”
uniq : “”
bits ev : EV_SYN EV_KEY EV_REL EV_ABS EV_MSC

/dev/input/event3
bustype : BUS_USB
vendor : 0x1
product : 0x1
version : 4
name : “Xarcade-to-Gamepad Device”
bits ev : EV_SYN EV_KEY EV_REL EV_ABS

/dev/input/event4
bustype : BUS_USB
vendor : 0x1
product : 0x1
version : 4
name : “Xarcade-to-Gamepad Device”
bits ev : EV_SYN EV_KEY EV_REL EV_ABS

/dev/input/event5
bustype : BUS_USB
vendor : 0x1
product : 0x1
version : 4
name : “SNES-to-Keyboard Device”
bits ev : EV_SYN EV_KEY EV_REL