snorp
Participant
Post count: 6

Hi,

last post is 1 month ago but after reading tons of Tutorials and Forumposts i cant fix my Problem. So I hope if I post here you can help me.

These are my Steps from Yesterday:


############################################################################

####
Raspbian & Retropie Installation Protocoll
############################################################################

####

1.   DOWNLOAD RASPBIAN IMAGE AND MOUNT IT ON MICROSD

2.   EXPAND FILESYSTEM
     type   'sudo raspi-config'
     select '1 Expand Filesystem'

3.   GET SYSTEM UP TO DATE AND INSTALL RETROPIE
     type   'sudo apt-get update'
     type   'sudo apt-get upgrade'
     type   'sudo apt-get install -y git dialog'
     type   'cd'
     type   'git clone git://github.com/petrockblog/RetroPie-Setup.git'
     type   'cd RetroPie-Setup'
     type   'chmod +x retropie_setup.sh'
     type   'sudo ./retropie_setup.sh'
     select 'Binaries-based installation'

4.   CONFIGURATE TIMEZONE AND KEYBOARD LAYOUT
     type   'sudo raspi-config'
     select '4 Internationalisation Options'
     select 'I2 Change Timezone' > 'Europe' > 'Berlin' > 'Finish'
     select '4 Internationalisation Options'
     select 'I3 Change Keyboard Layout' > ...

5.   REMOVE SPLASHSCREENS(1) AND LOGOS(2)
5.1  type   'cd RetroPie-Setup'
     type   'sudo ./retropie_setup.sh'
     select '3 Setup / Configuration (to be used post install)'
     select '328 Configure Splashscreen'
     select '2 Disable custom splashscreen on boot'
     type   'sudo nano /boot/config.txt'
     add    'disable_splash=1'
5.2  type   'sudo nano /boot/cmdline.txt'
     add    'logo.nologo'

6    ADD PS3 CONTROLLER VIA BLUETOOTH
     Shutdown Raspberry PI and connect PS3 Controller via USB Cable
     type   'lsusb'
     check controller is connected
     type   'cd /RetroPie-Setup/'
     type   'sudo ./retropie_setup.sh'
     select '3 Setup / Coniguration (to be used post install)'
     select '315 Install PS3 controller driver'
     select 'OK' > 'OK' > 'OK'
     type   'cd /opt/retropie/supplementary/ps3controller'
     type   'sudo ./sixpair'
     check Controller Address
     type   'sudo reboot'
     type   'cd /dev/input/'
     type   'ls'
     check js0 for first controller
     pull USB Cable and push PS Button, Controller connected (No.1)
     check Controller input
     type   'jstest js0'
     DO STEP 6 FOR EVERY CONTROLLER (max.16)

7    PS3 CONTROLLER KONFIGURATION
     not done yet...
################################################################################

I can connect 2 of 4 PS3 Controller no matter wich but max. 2. The first one gets LED1 and the second LED2. But the other 2 Controller blink.