Reply To: Neo Geo X joystick with Retropie 2.6 or 3.0

[retrocomp]

Hello. From “Menu” – “Configure Input” -> “No gamepads detected. Hold a button on your device to configure it” and I only can configure Keyboard.

If I exit to shell with F4:
pi@retropie ~ $ cd RetroPie-Setup
pi@retropie ~/RetroPie-Setup $ sudo ./retropie_setup.sh
3 – SETUP
317 – Register RetroArch Controller
OK to “Connect only…”
Couldn’t open joystick #0.

Creating a remote connection with ssh:

pi@retropie ~ $ cat /proc/bus/input/devices
I: Bus=0003 Vendor=1292 Product=4e47 Version=0100
N: Name=”TOMMO NEOGEOX Arcade Stick”
P: Phys=usb-bcm2708_usb-1.4/input0
S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1292:4E47.0001/input/input0
U: Uniq=
H: Handlers=js0 event0
B: PROP=0
B: EV=1b
B: KEY=1fff0000 0 0 0 0 0 0 0 0 0
B: ABS=30000
B: MSC=10

I: Bus=0003 Vendor=045e Product=0752 Version=0111
N: Name=”Microsoft Wired Keyboard 400″
P: Phys=usb-bcm2708_usb-1.5/input0
S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:045E:0752.0002/input/input1
U: Uniq=
H: Handlers=sysrq kbd event1
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff9f207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

pi@retropie ~/RetroPie-Setup $ jstest /dev/input/js0
Driver version is 2.1.0.
Joystick (TOMMO NEOGEOX Arcade Stick) has 2 axes (Hat0X, Hat0Y)
and 13 buttons (BtnX, BtnY, BtnZ, BtnTL, BtnTR, BtnTL2, BtnTR2, BtnSelect, BtnStart, BtnMode, BtnThumbL, BtnThumbR, ?).
Testing … (interrupt to exit)
Axes: 0: 0 1: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off 8:off 9:off 10:off 11:off 12:off

pi@retropie ~/RetroPie-Setup $ ps -u pi
PID TTY TIME CMD
2325 ? 00:00:00 sshd
2326 pts/0 00:00:00 bash
2409 tty1 00:00:00 bash
2416 tty1 00:00:00 emulationstatio
2420 tty1 00:00:19 emulationstatio
2536 pts/0 00:00:00 ps

pi@retropie ~/RetroPie-Setup $ sudo /opt/retropie/emulators/retroarch/retroarch-joyconfig
Couldn’t open joystick #0.