Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #98369
    undreamed
    Participant

    I setup the new 3.0 .. all works fine. Great work. But the hotkey for save and load dont work =/ all others select + start and others works… okay… select + b exit the gba emulator.. but its okay…

    Can any1 tell me why save&load not work? i use a generic usb controller and its configured:`input_device = “USB Gamepad ”
    input_driver = “udev”
    input_b_btn = “2”
    input_y_btn = “3”
    input_select_btn = “8”
    input_start_btn = “9”
    input_up_axis = “-1”
    input_down_axis = “+1”
    input_left_axis = “-0”
    input_right_axis = “+0”
    input_a_btn = “1”
    input_x_btn = “0”
    input_l_btn = “4”
    input_r_btn = “5”
    input_enable_hotkey_btn = “8”
    input_exit_emulator_btn = “9”
    input_menu_toggle_btn = “0”
    input_load_state_btn = “4”
    input_save_state_btn = “5”
    input_reset_btn = “2”
    input_state_slot_increase_axis = “+0”
    input_state_slot_decrease_axis = “-0”
    `

    #98379
    Floob
    Member

    Do they work if you hold select, then press F2 and F4 for save and load?
    Just want to check they work at all first.

    #98383
    undreamed
    Participant

    okay select+F2/F4 works… but why didnt work my gamepad?

    #98386
    patl
    Participant

    You must phush the hotkey button (select as Floob wrote ?) and then the buttons for save and load.

    #98387
    undreamed
    Participant

    i push/hold select and push “L” or “R” for save & Load.. but nothing happends

    #98388
    Floob
    Member
    #98390
    undreamed
    Participant

    okay.. i see the problem.. but not the solutionl…. my gamepad is configured correctly withe config tool… but ingame… L/R doesnt work… why?

    #98392
    Floob
    Member

    Have you deleted all the .cfg files then recreated it as detailed in the link? That has worked for at least 3 others on the forum.

    I think there is a conflict somewhere between one or more of the auto config files (that deal with the usbgamepad you have). I could be wrong, but removing them and recreating the one you want seems to work.

    #98394
    undreamed
    Participant

    it works! i delet all configs and make new ;) TY !!!!

    #98395
    Floob
    Member

    I think it may have been an issue with this file:
    Retrolink_USB_SEGA_Saturn_Classic_Controller.cfg

    If just that one is deleted it may have worked as well.

    #98396
    undreamed
    Participant

    okay.. but the problem with restart the gba emulator with select+b issnt solved with this “fix”… any1 an idea?

    #98398
    Floob
    Member

    Can you open a new thread for the GBA issue and I’ll take a look.

Viewing 12 posts - 1 through 12 (of 12 total)
  • The forum ‘Controller Configuration in RetroPie’ is closed to new topics and replies.