Super Pi – RPi b+ inside a Super Mario World cartridge

Tagged: controller, GPIO, modding, SNES

This topic has 4 replies, 4 voices, and was last updated 10 years, 5 months ago by saloonstudios.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
10/16/2014 at 21:40 #81820

traucha
Participant

Hi there people!
A few weeks ago I ordered a Raspberry Pi b+, USB single female slots, cooling devices for the RPi b+, SNES extensions cables, 32 GB micro SD card, etc…
The plan is to get everything inside an american model cartridge.
I first started emptying the the cartridge with a file and knife and then I made space for the SNES female controller connectors.
I had to remove the ethernet adapter and the 2 double USB slots to get inside the cartridge. My plan is to solder 3 single USB slots in a plate and link it to the original USB. The fourth USB slot will be for a tiny WLAN adapter, also inside the cartridge.
Now I’m running out of space and I don’t think it would be enough space for the RetroPie GPIO adapter.

How dangerous is it to connect the 2 SNES controllers directly to the GPIO?
Has someone linked 2 controllers directly to the GPIO? How?
Any recommendations?

Cheers!

10/16/2014 at 21:45 #81823

traucha
Participant

Wow… didn’t noticed the images where that huge

01/26/2015 at 12:42 #85965

hippiedalek
Participant

I’ve been contemplating a similar project to this myself, either using an NTSC SNES or NES cartridge case.

Sadly I can’t help you with your question but I’d love to know if you’d made any progress with this as I love your design.

02/04/2015 at 19:08 #86613

peanut
Participant

This might help.https://github.com/digitalLumberjack/mk_arcade_joystick_rpi/blob/master/README.md

04/01/2015 at 18:35 #93376

saloonstudios
Participant

I’ve got a similar project going, but I didn’t think to remove the USB and Ethernet jacks. I thought if I cut slots out for them that the Pi2 would fit, but the solder tips on the bottom of the PCB make it so I’m about 2-3mm too tight inside the SNES cart.
I wish they sold a Pi2 with single height USB jacks.
Any update on yours? I’d love to see the end result of how you got everything to fit.
Author

Posts