Homepage › Forums › RetroPie Project › Everything else related to the RetroPie Project › Segmentation fault (in log) – many systems

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • 03/10/2016 at 23:40 #119901
    retroshaun
    Participant

    As the subject says, I am getting segmentation faults in loads of systems. For example, SNES, Intellivision, Videopac, GBA etc. Whereas other systems are working perfectly.

    Any ideas how to fix this? Retropie 3.6 with a Pi 3.

    Tnx!

    03/11/2016 at 01:38 #119913
    zerojay
    Participant

    Are you overclocked? Could be that you have an unstable overclock if so.

    03/11/2016 at 17:48 #119977
    retroshaun
    Participant

    Not that I am aware of no. Can I check that somehow?

    03/12/2016 at 15:18 #120103
    retroshaun
    Participant

    Well I fixed the SNES problems (bad roms it seems) but some other systems still dont work – GBA seems to be the main offender. Roms look OK.

    03/15/2016 at 22:55 #120518
    neighbourhoodnerd
    Participant

    In my experience, segfaults are caused by overheating which can corrupt the memory card. If you’re overclocking, make sure you have a heatsink or an open case.

    You might be able to reinstall the emulator to fix this issue if it’s only affecting the one system.

    03/16/2016 at 02:47 #120534
    zerojay
    Participant

    Did you install the GBA bios?

    03/16/2016 at 14:11 #120579
    shoothere
    Participant

    I’m with zerojay on this one. It will segfault if the GBA bios isn’t found and good romsets are also crucial (learnedthis myself the hard way).

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Everything else related to the RetroPie Project’ is closed to new topics and replies.