Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #106435
    xenon-777
    Participant

    I have connect a HD over USB on my Pi. Works good so on. But it look as have RetroPi a incorrect boot order. It mounts the HD before it check it with e2fsck. e2fsck can not check mounted devices and break the boot with a error. I can continue the boot with ckt-D but theed is suboptimal.Anyone a idea?

    Error:

    cat /var/log/fsck/checkfs 
    Log of fsck -C -R -A -a 
    Sat Sep 19 23:16:10 2015
    
    fsck from util-linux 2.20.1
    /dev/sda1 is mounted.
    e2fsck: Cannot continue, aborting.
    
    dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN
    /dev/mmcblk0p1: 71 files, 9946/29117 clusters
    fsck died with exit status 8
    
    Sat Sep 19 23:16:10 2015
    ----------------

    check output:

    sudo e2fsck /dev/sda1
    e2fsck 1.42.5 (29-Jul-2012)
    RPi_Data: sauber, 5651/15269888 Dateien, 21275541/61049344 Blöcke

    fstab:

    cat /etc/fstab
    proc            /proc           proc    defaults          0       0
    /dev/mmcblk0p1  /boot           vfat    defaults          0       2
    /dev/mmcblk0p2  /               ext4    defaults,noatime  0       1
    UUID=45885bbb-3164-4d6d-9a0e-809b428475c2  /home/pi/hd  ext4  defaults  0  2
    # a swapfile is not a swap partition, so no using swapon|off from here on, use  dphys-swapfile swap[on|off]  for that
    

    and for all that not see wath i do:

    ls -l /home/pi/RetroPie
    insgesamt 12
    drwxr-xr-x  4 pi pi 4096 Sep 19 20:26 BIOS
    drwxr-xr-x  2 pi pi 4096 Aug 10 05:04 retropiemenu
    lrwxrwxrwx  1 pi pi   10 Sep 19 19:59 roms -> ../hd/roms
    drwxr-xr-x 46 pi pi 4096 Aug 10 05:04 roms-old
    df -h
    Dateisystem    Größe Benutzt Verf. Verw% Eingehängt auf
    /dev/root        30G    3,2G   26G   11% /
    devtmpfs        301M       0  301M    0% /dev
    tmpfs            61M    420K   61M    1% /run
    tmpfs           5,0M       0  5,0M    0% /run/lock
    /dev/sda1       230G     78G  140G   36% /home/pi/hd
    tmpfs           122M       0  122M    0% /run/shm
    /dev/mmcblk0p1   57M     20M   38M   35% /boot
    #106436
    petrockblog
    Keymaster

    you should put log output between code tags on the forum for readability.

    Also – that is not a complete fstab – When postting logs/configs, please post complete logs (via pastebin if they are large).

    #106442
    petrockblog
    Keymaster

    also make sure you have the “USB ROM service” disabled. (can be done from retropie-setup). you might want to sudo apt-get remove usbmount also.

    #106446
    xenon-777
    Participant

    ok … code is in

    and that is the complete error Log. There is no more. I can only give a dmesg output to but this is a little long.

    And if y say i shot activate “USB ROM service” y didn’t now what this make. Or y haven’t understand what i have done. The HD is fix. It will not connect ore disconnect in running. I have link the roms Dir direct to the HD. So “USB ROM service” will be extremely counterproductive. And before y ask, yes, this work perfect.

    #106447
    petrockblog
    Keymaster

    fstab is not complete – you should have more than 1 line in /etc/fstab

    not sure what the rest of your message means but I’m saying to make sure the usbmount daemon is not running.

    Are you using google translate ? :) y = you ?

    #106453
    xenon-777
    Participant

    y = you, correct … fstab completed and the dir with the link added. All good so? Can we go to the main problem? The incorrect boot order.

    #106455
    petrockblog
    Keymaster

    It’s easier to understand if you don’t abbreviate words like “you”. I’m too old to appreciate/understand txtspk.. :)

    Change the last 2 to a 3 in fstab in the line starting with UUID=45885bbb-3164-4d6d-9a0e-809b428475c2 (or change it to a 0 to skip the filesysten check).

    “man fstab” to learn more about these numbers.

    And also make sure the usbmount daemon is not enabled as mentioned earlier (apt-get remove it)

    #106468
    xenon-777
    Participant

    OK … 0 work. 3 didn’t. So to change the order did no effect. But it work. :) And i have brave look in manual. ;)

    But is this not an main bug? The System can not mount and then check. That will ever run in a error. It must check and then mount. miss i anything?

    And thank you. :)

    #106473
    petrockblog
    Keymaster

    did you do the other things i mentioned – removing usbmount ?

    #106513
    xenon-777
    Participant

    ok … you are right … without usbmount 3 work. :)

    one last thing. do you now how i deactivate the boot logo?
    i haven’t found it in rcx.d or rc.local.

    #106522
    petrockblog
    Keymaster

    can be done from retropie-setup

Viewing 11 posts - 1 through 11 (of 11 total)
  • The forum ‘Everything else related to the RetroPie Project’ is closed to new topics and replies.