Homepage › Forums › RetroPie Project › Everything else related to the RetroPie Project › [Resource] DOSBox Compatibility List

Viewing 18 posts - 1 through 18 (of 18 total)
  • Author
    Posts
  • 09/18/2015 at 15:00 #106332
    Anonymous
    Inactive

    “Never let it be said that your anal-retentive attention to detail never yielded positive results!”
    – Loki, Dogma

    Hello again! Sharing a bit more of the material I’ve been collating for my own RetroPie project. It’s a list of all of the DOSBox programs I’ve got running on DOSBox Pi, with a note as to how well they work and a couple of notes on what executables do what.

    Obviously, there can be several versions of DOS programs and you might not have the one I have, so I guess this is more of a guide than a bible. Hope it helps someone though!

    09/18/2015 at 17:21 #106342
    dankcushions
    Participant

    This is great! thanks :) you should upload it somewhere and link to the wiki (I guess you can link it to the upload here?)

    09/18/2015 at 17:44 #106345
    herbfargus
    Member

    I can add it to my gooogle drive folder that has all the other compatibility lists and post it on the wiki if that would be acceptable to you.

    09/18/2015 at 17:44 #106346
    Anonymous
    Inactive

    Done!

    09/18/2015 at 17:46 #106347
    Anonymous
    Inactive

    Oh, sorry herbfargus, I didn’t see your post as I was editing the wiki :-) That would be fine, however you’d like to do it!

    09/18/2015 at 18:01 #106349
    herbfargus
    Member

    Ha ha must have been while I was replying. I’ll copy it on my Google drive just so there is more than one copy. I’ll leave the reference to this post on the wiki as well.

    09/18/2015 at 18:17 #106351
    herbfargus
    Member

    Here we are: https://docs.google.com/spreadsheets/d/1Tx5k3F0_AO6w00WrXULMBSUTRhtLyIhHI8Wz8GuqLfQ/edit?usp=sharing

    The wiki has been updated with the google drive link as well and its editable by anyone so anyone can contribute to it.

    Thanks- Great list!

    09/18/2015 at 18:27 #106352
    Omnija
    Participant

    you should add Retro City Rampage: 486 it works as well.

    09/18/2015 at 19:40 #106356
    pi-guy
    Participant

    Any chance you guys have a guide for tweaking DOSBOX….maybe it’s not possible on RPI2. Also curious if anyone has tried the game MDK (Murder, Death, Kill) in dosbox on RPI2.

    09/18/2015 at 19:46 #106357
    Anonymous
    Inactive

    Oh go on then, I’ll write one :-) Look for it soon!

    As for MDK, if I remember right it works brilliantly!

    09/19/2015 at 05:59 #106387
    pi-guy
    Participant

    @Billy
    Really? That’d be great or at least attach your config files somewhere. As for MDK, it totally works on a desktop version of Dosbox but when installed within dosbox on the RPI2 it loads…does some sort of check (just like PC) then fails saying that the computer is a 486 but the system is too slow or something… I googled the error msg earlier and I’ve seen others report it (on non RPI2 forums) with no fix.

    I’m guessing it’s probably something to do with the settings…hence my post above.

    09/19/2015 at 11:33 #106398
    Anonymous
    Inactive

    Ack! You’re absolutely right, I’d forgotten – I had just the same problem with MDK! It was one of the few I had to give up on. Sorry to raise your hopes there, I was remembering it working it working on Playstation not PC.

    09/20/2015 at 00:20 #106444
    pi-guy
    Participant

    I’m trying to get my hands on the Playstation version, maybe someday soon….

    09/23/2015 at 14:25 #106678
    Anonymous
    Inactive

    Just a quick update to let everyone know I’m currently working on a guide to editing the DOSBox .conf files, and how to give each game its own set of settings. Hopefully you’ll see it very soon!

    12/02/2015 at 22:42 #111091
    lakeuk
    Participant

    Excellent spreadsheet resource, I’ve added TFX to the list, sadly it’s too slow to be playable, system performance test give a floating point speed of <100k per sec compared to running through dosbox on my old laptop gives a 1864k per sec rating allow maximum settings.

    What’s the link to the wiki?

    12/02/2015 at 22:59 #111092
    herbfargus
    Member

    https://github.com/RetroPie/RetroPie-Setup/wiki/PC

    03/23/2016 at 06:37 #121227
    pi-guy
    Participant

    I know it’s been a while, I thought I’d mention that I got my PI3 a few days ago and ran MDK2 under the dreamcast emulator. Works brilliantly, the cut scenes have choppy audio – but who cares? Still haven’t gotten my hands on the playstation version of MDK but MDK2 is a start. One problem that I’ve found with the dreamcast is that the controller I have (xbox360 MadCatz/Gamestop Clone) works mostly but doesn’t allow the “enter/select” button in the system menu so I can’t set the time….researching that issue.

    03/29/2016 at 16:23 #121828
    lakeuk
    Participant

    Also got myself a Pi3 this week, I’ve retested TFX and it runs perfectly and config detects that the hardware can run everything at maximum settings.

    One thought, the spreadsheet doesn’t convey what model Pi the support statement related to are we assuming it’ll now just be the latest Pi version. Should we have an extra column for minimum Pi version support matching the status, for example for TFX I’d put Works Perfectly and set minimum Pi to Pi3, if someone comes along with a lower spec Pi and find it also work perfectly on a Pi2 then minimum Pi would be changes to Pi2.

  • Author
    Posts
Viewing 18 posts - 1 through 18 (of 18 total)
  • The forum ‘Everything else related to the RetroPie Project’ is closed to new topics and replies.